Library

Protocol

Cerebrolysin (60mg Vial)

Complete dosage protocol and reconstitution guide for Cerebrolysin (60mg Vial).

Updated November 26, 2025 Research guide Research information only
Open calculator preset Build protocol outline TNHL options
Educational reference only. TNHL calculates and organizes user-entered values; it does not diagnose, prescribe, recommend doses, or replace guidance from a qualified professional.
MechanismCerebrolysin is a porcine brain‑derived peptide preparation containing low‑molecular‑weight neuropeptides and free amino acids that crosses the blood–brain barrier to support neuronal survival [1] . It mimics endogenous neurotrophic factors (e.g., NGF, BDNF) and modulates neuroinflammatory mediators [1] [2] .
Dosing20–32 mg once daily (gradual titration); split doses for >20 mg.
ReconstitutionAdd 3.0 mL diluent to a 60 mg vial.
StorageLyophilized at room temperature ≤25 °C (≤77 °F) ; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) and use within 7 days; do not freeze.

Calculator preset

Run the vial math before tracking.

At 20 mg/mL, 1 unit = 0.2 mg on a U-100 syringe; so 20 mg = 100 units and 32 mg = 160 units (units = mg ÷ 0.2).

Calculate this vial

01 · At a glance

Quickstart Highlights

Cerebrolysin is a porcine brain‑derived peptide preparation containing low‑molecular‑weight neuropeptides and free amino acids that crosses the blood–brain barrier to support neuronal survival [1] . It mimics endogenous neurotrophic factors (e.g., NGF, BDNF) and modulates neuroinflammatory mediators [1] [2] . This educational protocol presents a once‑daily subcutaneous approach using a practical dilution for clear insulin‑syringe measurements.

ReconstituteAdd 3.0 mL bacteriostatic water → 20 mg/mL concentration.
Reference dose20–32 mg once daily (gradual titration); split doses for >20 mg.
Easy measuringAt 20 mg/mL, 1 unit = 0.2 mg on a U-100 syringe; so 20 mg = 100 units and 32 mg = 160 units (units = mg ÷ 0.2).
StorageLyophilized at room temperature ≤25 °C (≤77 °F) ; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) and use within 7 days; do not freeze.
Start with sterile preparation, storage, and injection-site basics before using any calculator output. TNHL is a tracking and education tool only.

02 · Dosing & reconstitution

Dosing & Reconstitution Guide

A practical calculator-ready setup based on the imported protocol reference. Use these values as a math starting point, then verify every entry against your own vial, diluent, and professional guidance.

Standard / Gradual Approach (3 mL = 20 mg/mL)

Phase / setup Dose & frequency Volume / units
Week 120 mg (20,000 mcg)100 units (1.0 mL)
Week 224 mg (24,000 mcg)60 units (0.6 mL)
Week 328 mg (28,000 mcg)70 units (0.7 mL)
Week 4+32 mg (32,000 mcg)80 units (0.8 mL)

20–32 mg once daily (gradual titration); split doses for >20 mg.

Reconstitution Steps

  1. Confirm the vial amount, unit, and diluent amount before entering values in the calculator.
  2. Add diluent slowly down the inner wall of the vial when reconstitution is appropriate for the compound.
  3. Swirl or roll gently until dissolved; avoid shaking unless the product instructions specifically say otherwise.
  4. Label the vial with the date and concentration, then store according to the protocol and product instructions.

03 · What you'll need

Supplies Needed

Keep this as a planning checklist. TNHL does not sell or verify supplies on this page, and no supplier quality claims are made here.

Peptide Vials 8 weeks ≈ 26 vials
  • 12 weeks ≈ 42 vials
  • 16 weeks ≈ 58 vials
Insulin Syringes Count based on injections per day (1–2 depending on dose). Week 1 (1/day): 7 syringes Weeks 2–8 (2/day): 98 syringes
  • 8 weeks total: 105 syringes
  • 12 weeks total: 161 syringes
  • 16 weeks total: 217 syringes
Bacteriostatic Water Use 3.0 mL per vial for reconstitution.
  • 8 weeks (26 vials): 78 mL → 8 × 10 mL bottles
  • 12 weeks (42 vials): 126 mL → 13 × 10 mL bottles
  • 16 weeks (58 vials): 174 mL → 18 × 10 mL bottles
Alcohol Swabs One for the vial stopper + one for the injection site each administration.
  • 8 weeks (105 injections): 210 swabs → recommend 3 × 100‑count boxes
  • 12 weeks (161 injections): 322 swabs → recommend 4 × 100‑count boxes
  • 16 weeks (217 injections): 434 swabs → recommend 5 × 100‑count boxes

Protocol Overview

  • Goal: Support neuroprotection and neuronal survival through neurotrophic factor mimicry [1] [2] .
  • Schedule: Daily subcutaneous injections for 8–12 weeks (extend to 16 weeks if desired).
  • Dose Range: 20–32 mg daily with gradual titration.
  • Reconstitution: 3.0 mL per 60 mg vial (20 mg/mL) for accurate unit measurements.
  • Storage: Lyophilized at room temperature (≤25 °C); reconstituted refrigerated (2–8 °C); do not freeze.

Dosing Protocol

  • Suggested daily titration approach.
  • Start: 20 mg daily (100 units); increase by ~4 mg (20 units) per week as tolerated.
  • Target: 28–32 mg daily by Weeks 3–4.
  • Frequency: Once or twice per day (subcutaneous); split doses >20 mg into AM/PM.
  • Cycle Length: 8–12 weeks; optional extension to 16 weeks.
  • Timing: Any consistent time(s); rotate injection sites.

Storage Instructions

  • Lyophilized at room temperature ≤25 °C (≤77 °F) ; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) and use within 7 days; do not freeze.
  • Storage: Lyophilized at room temperature (≤25 °C); reconstituted refrigerated (2–8 °C); do not freeze.
  • Keep mixed and unmixed items clearly labeled so inventory and dose logs stay accurate.

04 · Good to know

Important Notes

  • Practical considerations for consistency and safety.
  • Use new sterile insulin syringes; dispose in a sharps container.
  • Rotate injection sites (abdomen, thighs, upper arms) to reduce local irritation.
  • Inject slowly; wait a few seconds before withdrawing the needle.
  • Document daily dose, timing (AM/PM), and site rotation to maintain consistency.
  • For doses exceeding 100 units (1.0 mL), split into two separate injections at different sites.

05 · How it works

How This Works

Cerebrolysin is a porcine brain‑derived peptide preparation containing low‑molecular‑weight neuropeptides and free amino acids that crosses the blood–brain barrier to support neuronal survival [1] .

It mimics endogenous neurotrophic factors (e.g., NGF, BDNF) and modulates neuroinflammatory mediators [1] [2] .

This educational protocol presents a once‑daily subcutaneous approach using a practical dilution for clear insulin‑syringe measurements.

The library page pairs that educational context with calculator-ready vial math, so users can understand the protocol structure and then track their own entered values in one place.

06 · Daily habits

Lifestyle Factors

  • Keep meals, training, sleep, and recovery notes in the journal so trends are easier to review.
  • Track body metrics only if they are relevant to the user's goal and approved data sources.
  • Use consistent timing and logging habits so adherence data is meaningful.

07 · What to expect

Potential Benefits & Side Effects

  • Cerebrolysin observations should be recorded conservatively: expected research endpoints, tolerability notes, injection-site reactions when applicable, sleep, appetite, energy, mood, and any adverse or unusual response.
  • This section is not a claim of therapeutic benefit.

08 · Technique

Injection Technique

Pre-injection preparation
  • Wash hands with soap and water.
  • Wipe the vial stopper and chosen site with alcohol, then let both dry.
  • Confirm the vial concentration, calculator result, and intended draw amount before loading the syringe.
Injection procedure
  • Use the route and needle technique directed by a qualified professional or product instructions.
  • For subcutaneous injections, rotate sites and inject slowly to limit leakage and irritation.
  • Do not reuse needles or syringes.
Post-injection care
  • Dispose of sharps in a puncture-resistant container.
  • Return stored items promptly to the correct temperature.
  • Log dose, site, date, time, inventory change, and any observation.

09 · Evidence

References

TNHL options

Peptide collections stay passive.

Open the TNHL Stan Store option that fits the order size. Product details, checkout, and fulfillment stay off-site.