Library

Protocol

Prostamax (20mg Vial)

Complete dosage protocol and reconstitution guide for Prostamax (20mg Vial).

Updated November 26, 2025 Research guide Research information only
Open calculator preset Build protocol outline TNHL options
Educational reference only. TNHL calculates and organizes user-entered values; it does not diagnose, prescribe, recommend doses, or replace guidance from a qualified professional.
MechanismProstamax is a synthetic bioregulator tetrapeptide (Lys‑Glu‑Asp‑Pro) described as prostate‑tissue–specific in preclinical literature[1]. Short peptides can interact with DNA/chromatin and influence gene expression programs[2], and several ultrashort peptides show cellular uptake via peptide/amino‑acid transporters[3][4].
DosingReference dose shown on this page: 6.67 mg.
ReconstitutionAdd 3.0 mL diluent to a 20 mg vial.
StorageKeep lyophilized vials cold (e.g., −20 °C [−4 °F] ) and protected from light; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) ; avoid repeated freeze–thaw cycles [11] [12] [13] .

Calculator preset

Run the vial math before tracking.

At ~6.67 mg/mL, 1 unit ~ 66.7 mcg ; 500 mcg ~ 7.5 units and the top dose of 3,000 mcg ~ 45 units on a U-100 syringe.

Calculate this vial

01 · At a glance

Quickstart Highlights

Prostamax is a synthetic bioregulator tetrapeptide (Lys‑Glu‑Asp‑Pro) described as prostate‑tissue–specific in preclinical literature[1]. Short peptides can interact with DNA/chromatin and influence gene expression programs[2], and several ultrashort peptides show cellular uptake via peptide/amino‑acid transporters[3][4]. This educational protocol presents a once‑daily subcutaneous approach, drawing from daily parenteral schedules in animal studies and general best practices for subcutaneous peptide delivery.

ReconstituteAdd 3.0 mL bacteriostatic water → concentration ≈ 6.67 mg/mL . At this dilution, 1 unit = 0.01 mL ≈ 66.7 mcg on a U‑100 insulin syringe. Suggested daily titration range (educational): 500–3000 mcg once daily with gradual increases, reflecting daily parenteral use in preclinical work and typical SC tolerability limits [1] [7] .
Reference doseReference dose shown on this page: 6.67 mg.
Easy measuringAt ~6.67 mg/mL, 1 unit ~ 66.7 mcg ; 500 mcg ~ 7.5 units and the top dose of 3,000 mcg ~ 45 units on a U-100 syringe.
StorageKeep lyophilized vials cold (e.g., −20 °C [−4 °F] ) and protected from light; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) ; avoid repeated freeze–thaw cycles [11] [12] [13] .
Start with sterile preparation, storage, and injection-site basics before using any calculator output. TNHL is a tracking and education tool only.

02 · Dosing & reconstitution

Dosing & Reconstitution Guide

A practical calculator-ready setup based on the imported protocol reference. Use these values as a math starting point, then verify every entry against your own vial, diluent, and professional guidance.

Standard / Gradual Approach (3.0 mL → ~6.67 mg/mL)

Phase / setup Dose & frequency Volume / units
Weeks 1–2500 mcg7.5 units (0.08 mL)
Weeks 3–41000 mcg15 units (0.15 mL)
Weeks 5–62000 mcg30 units (0.30 mL)
Weeks 7–123000 mcg45 units (0.45 mL)

Reference dose shown on this page: 6.67 mg.

Reconstitution Steps

  1. Using aseptic technique, draw 3.0 mL bacteriostatic water for injection (multi‑dose diluent with benzyl alcohol) [11] .
  2. Inject slowly down the vial wall; allow the powder to dissolve fully (gently swirl; do not shake).
  3. Label the vial and store at 2–8 °C (35.6–46.4 °F) ; avoid freeze–thaw cycling [12] [13] .

03 · What you'll need

Supplies Needed

Keep this as a planning checklist. TNHL does not sell or verify supplies on this page, and no supplier quality claims are made here.

Peptide Vials 8 weeks ≈ 5 vials
  • 12 weeks ≈ 9 vials
  • 16 weeks ≈ 13 vials
Insulin Syringes Per week: 7 (1/day)
  • 8 weeks: 56
  • 12 weeks: 84
  • 16 weeks: 112
Bacteriostatic Water equals reconstitution volume × vials). Peptide Vials (Prostamax, 20 mg each):
  • 8 weeks ≈ 5 vials
  • 12 weeks ≈ 9 vials
  • 16 weeks ≈ 13 vials Insulin Syringes (U‑100):
  • Per week: 7 (1/day)
Alcohol Swabs One for the vial stopper and one for the injection site daily.
  • Per week: 14 swabs (2/day)
  • 8 weeks: 112
  • 12 weeks: 168
  • 16 weeks: 224

Protocol Overview

  • Goal: Educational framework to explore prostate‑tissue support signals observed in preclinical models (reduced inflammatory and fibrotic markers) [1] .
  • Schedule: Daily subcutaneous injections for 8–12 weeks (optional extension to 16 weeks).
  • Dose Range: 500–3000 mcg daily with gradual titration.
  • Reconstitution: 3.0 mL per 20 mg vial (~6.67 mg/mL) for clear syringe conversions.
  • Storage: Lyophilized at −20 °C (−4 °F); reconstituted at 2–8 °C (35.6–46.4 °F); minimize freeze–thaw [12] [13] .

Dosing Protocol

  • Suggested daily titration approach with cautious evidence framing.
  • Start: 500–1000 mcg once daily; increase by ~500–1000 mcg every 1–2 weeks as tolerated.
  • Target: 2000–3000 mcg once daily by Weeks 5–8.
  • Rationale: Aligns with daily parenteral schedules in animal data and SC volume tolerability in adults [1] [7] .
  • Timing: Any consistent time of day; rotate injection sites.

Storage Instructions

  • Keep lyophilized vials cold (e.g., −20 °C [−4 °F] ) and protected from light; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) ; avoid repeated freeze–thaw cycles [11] [12] [13] .
  • Storage: Lyophilized at −20 °C (−4 °F); reconstituted at 2–8 °C (35.6–46.4 °F); minimize freeze–thaw [12] [13] .
  • Keep mixed and unmixed items clearly labeled so inventory and dose logs stay accurate.

04 · Good to know

Important Notes

  • Practical considerations for consistency and safety.
  • Use new sterile insulin syringes; dispose in an approved sharps container.
  • Rotate injection sites (abdomen, thighs, upper arms) to minimize lipohypertrophy and variability in absorption [14] [16] .
  • Subcutaneous technique: insert at 45° into subcutaneous tissue; aspiration is not required [5] [6] .
  • Follow WHO/NCBI injection best‑practice guidance for asepsis and preparation [8] .

05 · How it works

How This Works

Prostamax is a synthetic bioregulator tetrapeptide (Lys‑Glu‑Asp‑Pro) described as prostate‑tissue–specific in preclinical literature[1].

Short peptides can interact with DNA/chromatin and influence gene expression programs[2], and several ultrashort peptides show cellular uptake via peptide/amino‑acid transporters[3][4].

This educational protocol presents a once‑daily subcutaneous approach, drawing from daily parenteral schedules in animal studies and general best practices for subcutaneous peptide delivery.

The library page pairs that educational context with calculator-ready vial math, so users can understand the protocol structure and then track their own entered values in one place.

06 · Daily habits

Lifestyle Factors

  • Keep meals, training, sleep, and recovery notes in the journal so trends are easier to review.
  • Track body metrics only if they are relevant to the user's goal and approved data sources.
  • Use consistent timing and logging habits so adherence data is meaningful.

07 · What to expect

Potential Benefits & Side Effects

  • Prostamax observations should be recorded conservatively: expected research endpoints, tolerability notes, injection-site reactions when applicable, sleep, appetite, energy, mood, and any adverse or unusual response.
  • This section is not a claim of therapeutic benefit.

08 · Technique

Injection Technique

Pre-injection preparation
  • Wash hands with soap and water.
  • Wipe the vial stopper and chosen site with alcohol, then let both dry.
  • Confirm the vial concentration, calculator result, and intended draw amount before loading the syringe.
Injection procedure
  • Use the route and needle technique directed by a qualified professional or product instructions.
  • For subcutaneous injections, rotate sites and inject slowly to limit leakage and irritation.
  • Do not reuse needles or syringes.
Post-injection care
  • Dispose of sharps in a puncture-resistant container.
  • Return stored items promptly to the correct temperature.
  • Log dose, site, date, time, inventory change, and any observation.

09 · Evidence

References

TNHL options

Peptide collections stay passive.

Open the TNHL Stan Store option that fits the order size. Product details, checkout, and fulfillment stay off-site.

Related pages

Keep researching