Library

Protocol

Survodutide (10mg Vial)

Complete dosage protocol and reconstitution guide for Survodutide (10mg Vial).

Updated November 26, 2025 Research guide Research information only
Open calculator preset Build protocol outline TNHL options
Educational reference only. TNHL calculates and organizes user-entered values; it does not diagnose, prescribe, recommend doses, or replace guidance from a qualified professional.
MechanismSurvodutide (BI 456906) is a dual glucagon/GLP‑1 receptor agonist investigated for obesity and related metabolic conditions. Clinical trials used once‑weekly subcutaneous injections with dose‑dependent weight loss during a 20‑week escalation and maintenance thereafter [1] .
Dosing600–4800 mcg once weekly with gradual titration anchored to clinical trial ranges [1] [3] . Insulin‑syringe math: At ~5.00 mg/mL, 1 unit = 0.01 mL ≈ 50 mcg on a U‑100 insulin syringe.
ReconstitutionAdd 2.0 mL diluent to a 10 mg vial.
StorageLyophilized: freeze at −20 °C (−4 °F) . After

Calculator preset

Run the vial math before tracking.

At ~5.0 mg/mL, 1 unit = 0.01 mL = 50 mcg on a U-100 syringe; 600 mcg = 12 units and 4800 mcg = 96 units .

Calculate this vial

01 · At a glance

Quickstart Highlights

Survodutide (BI 456906) is a dual glucagon/GLP‑1 receptor agonist investigated for obesity and related metabolic conditions. Clinical trials used once‑weekly subcutaneous injections with dose‑dependent weight loss during a 20‑week escalation and maintenance thereafter [1] . Gastrointestinal effects (nausea/diarrhea) were the most common adverse events and can be mitigated with slower escalation strategies [3] , with overall safety acceptable in studied populations [1] [12] .

ReconstituteAdd 2.0 mL bacteriostatic water → ~ 5.00 mg/mL (~5000 mcg/mL). (2.0 mL chosen to keep higher weekly doses ≤1.0 mL per injection.) Typical
Reference dose600–4800 mcg once weekly with gradual titration anchored to clinical trial ranges [1] [3] . Insulin‑syringe math: At ~5.00 mg/mL, 1 unit = 0.01 mL ≈ 50 mcg on a U‑100 insulin syringe.
Easy measuringAt ~5.0 mg/mL, 1 unit = 0.01 mL = 50 mcg on a U-100 syringe; 600 mcg = 12 units and 4800 mcg = 96 units .
StorageLyophilized: freeze at −20 °C (−4 °F) . After
Start with sterile preparation, storage, and injection-site basics before using any calculator output. TNHL is a tracking and education tool only.

02 · Dosing & reconstitution

Dosing & Reconstitution Guide

A practical calculator-ready setup based on the imported protocol reference. Use these values as a math starting point, then verify every entry against your own vial, diluent, and professional guidance.

Standard / Gradual Approach (2.0 mL = ~5.00 mg/mL)

Phase / setup Dose & frequency Volume / units
Weeks 1–4600 mcg12 units (0.12 mL)
Weeks 5–81200 mcg24 units (0.24 mL)
Weeks 9–121800 mcg36 units (0.36 mL)
Weeks 13–162400 mcg48 units (0.48 mL)
Weeks 17–20(optional escalation) 3600 mcg72 units (0.72 mL)
Weeks 21–24(optional escalation) 4800 mcg96 units (0.96 mL)

600–4800 mcg once weekly with gradual titration anchored to clinical trial ranges [1] [3] . Insulin‑syringe math: At ~5.00 mg/mL, 1 unit = 0.01 mL ≈ 50 mcg on a U‑100 insulin syringe.

Reconstitution Steps

  1. Draw 2.0 mL bacteriostatic water with a sterile syringe.
  2. Inject slowly down the vial wall; avoid foaming.
  3. Gently swirl/roll until dissolved (do not shake).
  4. Label and refrigerate at 2–8 °C (35.6–46.4 °F) , protected from light.

03 · What you'll need

Supplies Needed

Keep this as a planning checklist. TNHL does not sell or verify supplies on this page, and no supplier quality claims are made here.

Peptide Vials 8 weeks (0.6→1.2 mg): total ≈ 7.2 mg → 1 vial
  • 12 weeks (adds 1.8 mg phase): total ≈ 14.4 mg → 2 vials
  • 16 weeks (adds 2.4 mg phase): total ≈ 24.0 mg → 3 vials
Insulin Syringes Per week: 1 syringe (1 injection/week)
  • 8 weeks: 8 syringes
  • 12 weeks: 12 syringes
  • 16 weeks: 16 syringes
Bacteriostatic Water Use ~2.0 mL per vial.
  • 8 weeks (1 vial): 2.0 mL → 1 × 10 mL bottle
  • 12 weeks (2 vials): 4.0 mL → 1 × 10 mL bottle
  • 16 weeks (3 vials): 6.0 mL → 1 × 10 mL bottle
Alcohol Swabs One for the vial stopper + one for the injection site per dose.
  • Per week: 2 swabs
  • 8 weeks: 16 swabs → recommend 1 × 100‑count box
  • 12 weeks: 24 swabs → recommend 1 × 100‑count box
  • 16 weeks: 32 swabs → recommend 1 × 100‑count box

Protocol Overview

  • Goal: Support clinically meaningful weight reduction and metabolic improvements over time [1] [3] .
  • Schedule: Weekly subcutaneous injections for 8–12 weeks (optional extension to 16–24 weeks depending on tolerance and goals) [1] .
  • Dose Range: 600–4800 mcg weekly (0.6–4.8 mg), escalating as tolerated within trial‑tested ranges [1] [3] .
  • Reconstitution: 2.0 mL per 10 mg vial (~5.00 mg/mL) to keep higher weekly doses ≤1.0 mL.
  • Storage: Lyophilized frozen; reconstituted refrigerated; avoid freeze–thaw cycles.

Dosing Protocol

  • Suggested once‑weekly titration approach informed by clinical studies.
  • Start: 600 mcg once weekly.
  • Titrate: Increase by ~600 mcg every 4 weeks as tolerated (e.g., 0.6 → 1.2 → 1.8 → 2.4 mg; optional 3.6 → 4.8 mg) in line with dose ranges and escalation concepts used in trials [1] [3] .
  • Frequency: Once per week (subcutaneous).
  • Timing: Use a consistent weekly day/time; rotate injection sites.
  • Note: Slower escalations can mitigate GI adverse events such as nausea and diarrhea [3] .

Storage Instructions

  • Proper storage preserves peptide stability.
  • Lyophilized: Store at −20 °C (−4 °F) in dry, dark conditions.
  • Reconstituted: Refrigerate at 2–8 °C (35.6–46.4 °F); protect from light; avoid repeated freeze–thaw.
  • Allow vials to reach room temperature before opening to reduce condensation.

04 · Good to know

Important Notes

  • This Survodutide page is for educational research organization only.
  • Confirm route, dose, contraindications, monitoring, storage, and cycle decisions with qualified professional guidance.
  • Use sterile technique, rotate sites when applicable, and log missed doses, reactions, and inventory changes.

05 · How it works

How This Works

Survodutide (BI 456906) is a dual glucagon/GLP‑1 receptor agonist investigated for obesity and related metabolic conditions.

Clinical trials used once‑weekly subcutaneous injections with dose‑dependent weight loss during a 20‑week escalation and maintenance thereafter [1] .

Gastrointestinal effects (nausea/diarrhea) were the most common adverse events and can be mitigated with slower escalation strategies [3] , with overall safety acceptable in studied populations [1] [12] .

The library page pairs that educational context with calculator-ready vial math, so users can understand the protocol structure and then track their own entered values in one place.

06 · Daily habits

Lifestyle Factors

  • Keep meals, training, sleep, and recovery notes in the journal so trends are easier to review.
  • Track body metrics only if they are relevant to the user's goal and approved data sources.
  • Use consistent timing and logging habits so adherence data is meaningful.

07 · What to expect

Potential Benefits & Side Effects

  • Survodutide observations should be recorded conservatively: expected research endpoints, tolerability notes, injection-site reactions when applicable, sleep, appetite, energy, mood, and any adverse or unusual response.
  • This section is not a claim of therapeutic benefit.

08 · Technique

Injection Technique

Pre-injection preparation
  • Wash hands with soap and water.
  • Wipe the vial stopper and chosen site with alcohol, then let both dry.
  • Confirm the vial concentration, calculator result, and intended draw amount before loading the syringe.
Injection procedure
  • Use the route and needle technique directed by a qualified professional or product instructions.
  • For subcutaneous injections, rotate sites and inject slowly to limit leakage and irritation.
  • Do not reuse needles or syringes.
Post-injection care
  • Dispose of sharps in a puncture-resistant container.
  • Return stored items promptly to the correct temperature.
  • Log dose, site, date, time, inventory change, and any observation.

09 · Evidence

References

TNHL options

Peptide collections stay passive.

Open the TNHL Stan Store option that fits the order size. Product details, checkout, and fulfillment stay off-site.